HP Envy 4502s Manual Usb Connect Network Problem Fix Driver Download Wireless Setup

If asked, select the date and time, and touch Yes to confirm your decision. A welcome screen appears on the printer’s control panel. Continue to the next stage to mount the ink cartridges. Step 3: Install the ink cartridges: Insert the ink cartridges that came with your printer in the pack. Raise the ink cartridge access door before it locks into place. The carriage moves slightly to the left side. Before continuing, wait until the carriage is quiet and motionless. One of the ink cartridges should be removed from its box. Make sure you just strike the ink cartridge's black plastic.

Remove the ink cartridge's plastic film. To access the ink cartridge slot, raise the cover. Insert the ink cartridge into its slot until it snaps into place, with the nozzles pointing at the printer. To lock the ink cartridge into place, close the lid on the ink cartridge slot. Carry out the same operation on the other ink cartridge. Close the access door to the ink cartridges. Step 4: Fill the input tray with paper: Fill the input tray with plain US letter or A4 document. To extend the input tray, open the input tray door and pull it towards you. Slide the paper guides out as far as you can.

Place the paper in portrait mode, with the print side facing down. Make sure you don't have more than 250 sheets loaded. Push the stack into the tray until it comes to a halt. Slide the paper guides around the edge of the stack of papers until they meet. Do not push the guides in very tightly that they bind against the paper. Push the input tray right into the printer, and then touch Done on the printer control panel. Remove the output tray, then raise the output tray extender gently. Align the ink cartridges in Phase 5: Aligning the ink cartridges is a necessary criterion to achieve the best print quality.

To properly align the ink cartridges, use the alignment page from the previous step. Lift up the scanner lid. Place the alignment page on the scanner glass with the print side down. Place it in the centre of the glass, following the engraved guides. Close the scanner lid, and then touch OK on the printer’s control panel. The ink cartridges are then aligned by the printer. Touch OK on the printer control panel after the ink cartridges have been aligned. Your HP printer hardware is now all set and you can load the printing programme. Step 6: Install the printer programme

You can download the new version of the printing programme from 123.hp.com/envy. You can also download HP Smart App to set up your printer wirelessly. Now run the downloaded file to complete the HP Envy Printer setup. HP’s Envy brings home a wide range of functionalities at a pocket-friendly price and elegant style. To ensure that you enjoy all the features listed below, download and instal the appropriate software drivers from 123.hp.com/envy or from the installation CD that came along with the printer. Print borderless images and review documents easily at a breathtaking resolution.

Save paper and the planet with automatic two-sided printing and recyclable ink-cartridges. Printing made hassle-free with HP’s wireless print setup. Print more and save energy with optional high-capacity cartridges, as the Envy is ENERGY STAR eligible. number 123 Specifications for the HP Envy Furthermore, using HP ePrint and HP All in One Printer remote, you can now print from anywhere with an active Internet connection. The specifications for the Envy are listed below. ISO sensitivity: 7 Black density of up to 8.8 ppm, colour density of up to 5.2 ppm Hardware resolution up to 1200 x 2400 ppi.

Frequently Asked Questions: